COBALT (POLYVINYL FLAKE)

Likit Granit manufactures in Turkey with a monthly production capacity of 1 million pounds of flake. Likit Granit Flake is a unique and customisable floor and wall cladding solution consisting of water-based resin materials, organic minerals, additives and various pigments.

Available in over 80 colour styles and four standard sizes, these flakes can be mixed and matched for a personalised design. The combination of specially formulated epoxy colour chips enhances the aesthetics and performance of resinous coatings.

The main component of our products is Polyvinly. It can be applied with Epoxy of any quality and variety. It can be used for a long life thanks to its UV resistance. No breaking and dusting.

Areas of Use:

• Warehouses and garages
• Commercial kitchens
• Industrial floors
• Residential and commercial interiors
• Patio floors and outdoor decks
• Walkways and laboratories
• Shopping centers and parking lots
• Sports facilities and universities
• Airports, restaurants, and cafes
• Hotels and supermarkets

Advantages:

• Superior chemical and abrasion resistance
• Aesthetic appeal with over 80 color styles
• Cost-effective with minimal maintenance
• Enhanced slip resistance due to orange peel texture
• Seamless and flexible surface
• Resistant to dirt, moisture, and microbes
• Easy cleaning with soap and water
• No waxing required
• UV-stable pigments to prevent color fading
• Non-flammable and environmentally friendly

How to Apply:

Surface Preparation: Begin with a clean, dry, and level surface. Any cracks or damages should be repaired. The surface must be free of dust, grease, or any contaminants that might affect adhesion.

Primer Application: Apply a suitable epoxy primer to enhance the adhesion of the FLAKE system.

Base Coat Application: Once the primer is set, apply the base coat. The color of the base coat can influence the overall appearance of the FLAKE system.

Broadcasting FLAKE: While the base coat is still wet, broadcast the FLAKE into the resin at the desired density. Ensure even distribution for a uniform appearance.

Curing Time: Allow sufficient time for the base coat to cure, typically overnight.

Excess FLAKE Removal: Once cured, remove any loose or excess FLAKE to achieve a smooth, even surface.

Seal Coat Application: Apply a clear topcoat to seal and protect the FLAKE surface. This not only enhances durability but also provides a glossy or matte finish, based on preference.

Final Curing: Allow the final coat to cure properly, which may take several hours to a day, depending on environmental conditions.

Inspection and Touch-Up: After curing, inspect the surface for any imperfections or missed spots and perform touch-ups as necessary.

Custom blend and color matching options are available for a unique and personalized finish, with no minimum order requirement. This detailed process ensures a high-quality, durable, and aesthetically pleasing surface that lasts.

Flakes Application Coverage Rates:

Application coverage rates will help you estimate how much color flake you will need to complete the flooring project. Although coverage rates vary depending on application techniques, here are some common application coverage rates which can be used as good references: